The Eclipse Dual-Tier Sink
The Sink That Does It All.
The chef’s dream sink. Two tiers working at once, so you prep, rinse and dry in one spot without anything waiting its turn. Handcrafted to your exact space in Edgewater, Florida.
2 Tiers
WORKING AT ONCE
Lifetime
LIMITLESS WARRANTY
USA
Handcrafted In Edgewater, FL
How The Eclipse Works
Two Tiers. Working At Once.
Most workstation sinks give you one ledge, so one accessory at a time. The Eclipse stacks a second tier above the first, giving you two full workstations in the same sink.
UPPER TIER
Prep On Top
The undermount flange extends a half inch front and rear, creating a second tier above the main ledge. Slide the cutting board or drying rack across it to work right over the basin.
LOWER TIER
Rinse Below
The main half-inch ledge sits one inch below the countertop. The colander rides here, directly under whatever’s on the top tier.
TOGETHER
Nothing Waits Its Turn
Both tiers work at the same time. Dice on top while a colander drains below, or wash on one level while you prep on the other.
Start To Finish
Prep, Rinse & Dry.
01
Prep
Set the Pro Cutting Board on the upper tier. Chop over the basin and sweep scraps straight down.
02
Rinse
Rinse produce in the Drop In Strainer on the lower tier. The Pro Cutting Board sits right above it, so everything goes from rinsed to sliced in one move.
03
Dry
Set the Drying Rack on the ledge. Produce and dishes drip right into the sink, not onto your counter.
Accessories · Sold Separately
Every Tool, Built For The Ledge.
Each accessory sits right on the ledge, so you work over the basin instead of on your counter. Pick only the pieces you want, in any Havens metal and finish except hand hammered.
Pro Cutting Board
Prep & chop directly over your sink without taking up counter space.
Available in 12″ · 15″ · 18″
Drop In Strainer
Rinse and drain produce directly over the basin.
Available in 12″ · 15″ · 18″
Sponge Caddy
Keep sponges, brushes, and cleaning essentials organized and within reach.
Available in 3″ · 6″
Drying Rack
Dry dishes, rinse produce, and keep countertops clear.
Available in 12″ · 15″ · 18″
Drop In Bowl
Perfect for rinsing, soaking, mixing, and food prep.
Available in 12″ · 15″ · 18″
Hide A Drain
Conceal your sink drain for a clean, seamless finish.
Available for Bar & Kitchen
Mixing Bowl Cutting Board
Combine chopping and mixing into one convenient prep station.
Available in 12″ · CUSTOM
Triple Serve Board
Three integrated bowls for prepping, organizing, and serving.
Available in 9″ · CUSTOM
Want The Full Setup?
Ask about our accessory packages when you request your quote.
FULLY CUSTOM
Any Size. Your Kitchens.
There’s no size chart to squeeze into. Every Eclipse is built to order at our Edgewater headquarters, to the exact dimensions of your space.
SIZE
Whatever your space calls for. Approximate measurements are enough to start, and for an unusual space we’ll send a template kit so your exact dimensions are captured before anything is built.
STYLES
Undermount, topmount or apron-front farmhouse.
Metals
16-gauge Type 316 stainless steel, 14-gauge 48oz pure copper or 16-gauge 48oz premium brass.
Finishes
All 21 Havens finishes, across stainless steel, pure copper and premium brass.
why havens
American Metals, American Hands, Every Piece.
Every Eclipse is built by hand by our craftsmen at our headquarters in Edgewater, Florida.
Made In The USA
Cut, welded and finished by our craftsmen in Edgewater, FL. Nothing imported, nothing pulled off a shelf.
Heavy-Gauge Metal
16-gauge Type 316 stainless, 14-gauge 48oz pure copper and 16-gauge 48oz premium brass, built for daily use in a working kitchen.
Limitless Lifetime Warranty
Every sink we build is backed for life, so the Eclipse is an investment, not a replacement cycle.
GET A QUOTE
Ready For Your Eclipse?
Tell us about your kitchen and a real person from the Havens team will follow up with pricing and timing.
questions
FAQs
How is the Eclipse workstation sink installed?
Our Eclipse workstation sinks are available in undermount, topmount, and farmhouse apron front configurations. Each sink is custom fabricated to your specifications, allowing it to integrate with your kitchen design. Installation is handled by your contractor or installer, and our team is available to answer questions throughout the process. Our sinks accommodate a standard 3½ inch kitchen drain.
Will the Eclipse sink fit my existing countertop or cabinet?
Absolutely! Every Havens Eclipse sink is custom fabricated to your measurements, whether you're building a new kitchen or replacing an existing sink. We work from your countertop opening dimensions and provide engineered drawings for your review and approval before fabrication begins. From standard layouts to unique countertop cutouts, we build to fit your space.
How do I care for my Eclipse workstation sink?
Every Havens sink is designed for everyday use, with care depending on your chosen metal and finish. Our Type 316 stainless steel sinks are easy to maintain with regular cleaning, while our pure copper and premium brass sinks feature living finishes that naturally develop character over time. For copper and brass, we recommend simple soap and water to preserve the natural patina. Explore our Care & Cleaning Guide for detailed instructions.
Are workstation accessories included with the Eclipse sink?
Workstation accessories are sold separately, allowing you to customize your sink around your needs. Choose from cutting boards, drying racks, drop in bowls, strainers, sponge caddies, and more. We also offer Chef Packages that bundle multiple accessories for a complete workstation setup.
What's the difference between the Legacy and Eclipse workstation sinks?
Our Legacy Series features a single integrated accessory ledge for food prep, rinsing, and cleanup directly over the basin. The Eclipse Series takes workstation functionality further with two integrated tiers, allowing multiple accessories to be used simultaneously at different levels. Both designs are fully customizable in size, metal, finish, and installation style, so you can choose the workstation that best fits your kitchen and daily routine.
What metals are available for the Eclipse workstation sink?
Havens Eclipse workstation sinks are handcrafted in the USA using 16 gauge Type 316 stainless steel, 14 gauge 48oz pure American copper, or 16 gauge 48 oz premium brass. Choose from our collection of luxury metal finishes, including hand hammered and textured options, to create a custom workstation sink built around your kitchen design.